How Its Made- AILERONS
The ailerons are made by gluing two thin strips of balsa separated by a spar along one of the longer edge......
The grooves and hole to accommodate the control rods are cut on the broader side of the made ailerons........
The control rod(cycle spoke) is inserted in a plastic tube(gel pen refill) big enough to allow freedom of rotation and bent as needed..........
The aileron control rods are bent as shown.......
The cycle spoke is inserted in the aileron and is secured into place by sticking a piece of cloth on top of it this aileron is then glued on to the wing using ribbon hinges......