V. Sabareesh, Milan K John, C. Muraleedharan, Rohinikumar B, “Improved solar drying performance by ultrasonic desiccant dehumidification in indirect forced convection solar drying of ginger with phase change material”, Renewable Energy, Elsevier, Volume 169, May 2021, PP. 18280-1293
Aravind S, Milan K John, Rohinikumar B, Muraleedharan. C, “Performance Assessment of Banana Drying using a Forced Convection Solar dryer” International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, vol.9, Issue-9S, pp.1-6, July 2020.
Kartheeswaran, A., Jothi, T.J.S. & Arackal, R.S. Visualisation studies on plane jets at low Reynolds numbers. Sādhanā 46, 50 (2021).
Suraj, P., George, J., Arun, P. et al. “Theoretical and experimental feasibility study of groundnut shell gasification in a fluidized bed gasifier”. Biomass Conversion Biorefinery. 10, 735–742 (2020).
Sreehari Sreekumar, Albin Joseph, CS Sujith Kumar, Shijo Thomas, “Investigation on influence of antimony tin oxide/silver nanofluid on direct absorption parabolic solar collector”, Journal of Cleaner Production, (2019) 119378, Elsevier
Albin Joseph, Sreehari Sreekumar, CS Sujith Kumar, Shijo Thomas, “Optimisation of thermo-optical properties of SiO2/Ag–CuO nanofluid for direct absorption solar collectors”, Journal of Molecular Liquids, (2019) 111986, Elsevier
AJoseph, Albin, Sreehari Sreekumar, and Shijo Thomas. "Energy and exergy analysis of SiO2/Ag-CuO plasmonic nanofluid on direct absorption parabolic solar collector." Renewable Energy 162 (2020): 1655-1664.
V. Muthya Goud, V. Vaisakh, M. Joseph, and V. Sajith, “An experimental investigation on the evaporation of polystyrene encapsulated phase change composite material based nanofluids,” Applied Thermal Enineering, vol. 168, Mar. 2020, doi: 10.1016/j.applthermaleng.2019.114862.
A Bakhirathan, R Giridhar, K D P Pavan Kumar, Gangadhara Kiran Kumar Lachireddi, “Thermal Performance of Micro-Pulsating Heat Pipe”, International Journal of Engineering and Advanced Technology (IJEAT), 2019
SB, Vishnu, Soumyajit Bhowmick, and Biju T. Kuzhiveli. "Experimental and Numerical Investigation of Stratification and Self pressurization in a High Pressure Liquid Nitrogen Storage Tank." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects (2019): 1-15.
Hussain, KT Ijas, and T. J. S. Jothi. "Vortex ring propagation and interactions studies." Sādhanā 43.7 (2018): 1-11.
Jilse Sebastian, Vishnu Vardhan Reddy Mugi, C Muraleedharan, A Santhiagu, “Optimization of energy and materials in acid esterification of rubber seed oil through RSM and ANN”, ISHMT Digital Library, pp 1425-1431. 2017.
Sundar R. Nath, M. Mubarak, A. Bhowmik, A. Shaija, “Effect of Photo-limitation on growth of microalgae in Tubular photo bioreactor”, Journal of Advanced Engineering Research, Volume 5, Issue 1, 2018, pp.1-5.
S. Rajesh Kana, A. Shaija, K. Varun Sankar, “Diesel Engine Characteristic Studies with Metal Oxide Doped Nanoparticle in Avocado Biodiesel”, Journal of Advanced Engineering Research ISSN: 2393-8447 Volume 4, Issue 2, 2017, pp.114-118.
M. Mubarak, P. Prasanth, A. Shaija, “Bubble column photobioreactor for Chlorella pyrenoidosa cultivation and validating gas hold up and volumetric mass transfer coefficient”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 10.1080/15567036.2019.1680769
M. Mubarak, P. Prasanth, A. Shaija, “Bubble column photobioreactor for Chlorella pyrenoidosa cultivation and validating gas hold up and volumetric mass transfer coefficient”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 10.1080/15567036.2019.1680769
Akhil Varghese, C. Muraleedharan, Arun P, “DFT Analysis of Metal Complexes for Selective Nitrogen Removal from the Syngas Based on Binding Energy Criteria”, Advances in Natural and Applied Sciences, 10, 2016, pp. 466-471.
VipinV. C., Jilse. Sebastian, C. Muraleedharan, and A. Santhiagu, “DOE Analysis Applied for Enzymatic Transesterification of High FFA Rubber Seed Oil,” International Journal of Scientific & Engineering Research, vol. 7, no. 6, pp. 28–31, 2016 (National Conference on Recent Trends in Mechanical Engineering by JNTUH College of Engineering Hyderabad, Telangana).
Anup Johnson, A. Shaija, “Theoretical prediction of pressure drop and under rib velocity of single serpentine and repetitive five pass spiral flow fields for polymer electrolyte membrane fuel cells”, Advances in Natural and Applied Sciences (Vol. 10, Issue 4),Publisher: American-Eurasian Network for Scientific Information.
Akhil Varghese, C. Muraleedharan, Arun P, “DFT analysis of metal complexes for selective nitrogen removal from the syngas based on binding energy”, Advances in Natural and Applied Sciences, ISSN:19950772, Annexure II, SNo.559
C.M. Shone and T.J.S. Jothi, “Preparation of Gasification feedstock from leafy biomass”, Environmental Science and Pollution Research, Vol. 23, No. 10, pp 9364–9372, 2016
M. Mubarak, Priyank Gupta, A. Shaija, T.V. Suchithra, “Production of Bioethanol from Salvinia Molesta and its Utilization in Single Cylinder SI Engine”, Journal of Advanced Engineering Research, Volume 4, Issue 1, 2017, pp.67-72.
Anil M, Rupesh S, Muraleedharan C, Arun P, “Analysis On The Effect Of
Turbulence In The Modelling Of Fluidized Bed Reactors Using CFD”, International Journal of Applied Engineering Research (IJAER) Vol. 10, 2015, pp.7926 -7930. Print ISSN : 0973-4562 Online ISSN : 1087--1090.
G. Gopi, T.J.S. Jothi and S. Kumaravel, “Effect of Dye Concentration on Patterned Luminescent Solar Concentrator”, Journal of Thermal Engineering, Vol. 7, No. 2, pp. 240-255, 2021.
National and International conferences
A Akarsh, Sumer Dirbude, “Heat transfer enhancement in a PCM-based shell-and-tube-type thermal-energy storage device with nano-particle enhancement, the addition of triangular annular fins, fin pitch, and HTF flow reversal”, 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, IHMTC 2021, 17-20 December 2021, pages 1343-1350. https://doi: 10.1615/IHMTC-2021.2030.
A Akarsh, Sumer Dirbude, "Effect of HTF flow direction, mass flow rate and fins on melting and solidification in a latent-heat-based thermal storage device", J. Phys.: Conf. Ser. 2054 012049, 2021. https://doi.org/10.1088/1742-6596/2054/1/012049.
Rao L. Hanmant, and Sumer Dirbude, “Numerical Modelling and Optimization of Packed-Bed Thermal-Energy Storage System”, International Conference on Advances in Thermal Engineering and Applications, Journal of Physics: Conference Series, 2178.1 (2022). https://doi.org/10.1088/1742-6596/2178/1/012003
Divyateja B. Charles, K. S. Unnikrishnan, and B. Rohinikumar, "Modelling and Numerical Simulation of Nanoenhanced PV-PCM System for Heat Transfer Augmentation from the Panel", International Conference on Advances in Thermal Engineering and Applications, Journal of Physics: Conference Series, 2054.1 (2021). https://doi.org/10.1088/1742-6596/2054/1/012051.
Vishnu N, Milan K. John, B. Rohinikumar, and C. Muraleedharan, “Modelling, Dynamic Simulation and Parametric Studies of Double Pass Solar Air Heater for Solar Drying Application.” Journal of Physics: Conference Series 2054 (1). https://doi.org/10.1088/1742-6596/2054/1/012004.
A. S. Rani, B. Rohinikumar, and C. Muraleedharan, “Design and analysis of a gravity based dual-axis solar tracker,” International Conference on Energy and Environment (ICEE 2021) Jyothi Engineering College, Thrissur, India, April 09-10, 2021, pp. 1–8, 2021.
Amulya Y, M. Ijas Ahmed, Gangadhara Kiran Kumar L, “Comparison of CFD Simulation and Experimental Study of a Counter Flow Liquid Desiccant Dehumidifier”, International Conference on Energy and Environment (ICEE 2021) Jyothi Engineering College, Thrissur, India, April 09-10, 2021.
Jasani Brijesh Kumar J, Gangadhara Kiran Kumar L, “Energy Saving Potential of Retrofits in Existing Building: A Case Study of Composite Climate”, International Conference on Energy and Environment (ICEE 2021) Jyothi Engineering College, Thrissur, India, April 09-10, 2021.
Maheshwar A., L. Ramesh Krishnan, and L. Gangadhara Kiran Kumar, “Thermal Comfort Analysis of a Naturally Ventilated Regular Size Room Equipped with Ceiling Fan”, International Conference on Advances in Thermal Engineering and Applications, Journal of Physics: Conference Series, 2054.1 (2021). https://doi.org/10.1088/1742-6596/2054/1/012002.
Balavinayagam K., K. S. Unnikrishnan, and B. Rohinikumar, “Numerical Investigations on Phase Change Material-Based Battery Thermal Management System”, International Conference on Advances in Thermal Engineering and Applications, Journal of Physics: Conference Series, 2054.1 (2021). https://doi.org/10.1088/1742-6596/2054/1/012003
Kumar M. Manoj, A. Inbaoli, C. S. Sujith Kumar, and K. P. Vineesh, “Experimental Investigation on Effect of Surfactant on Cooling Dynamics of Stainless Steel”, Materials Today: Proceedings, 47 (2021), 3340–45. https://doi.org/10.1016/j.matpr.2021.07.153.
Arjun M M, Sujith Kumar C. S, Sudhanshu Anand, Sandeep Thakur, “Steam Use Optimizing in Pulp and Paper Industry: A Case Study on a Recycled Fiber (RCF) Based Paper Mill”, ICTCEES Conference July 18, 2020.
Sabareesh Vijayakumar, Milan K. John, C. Muraleedharan, B. Rohinikumar, “Experimentation and Mathematical Modelling: Indirect Forced Convection solar drying of tomato with novel drying chamber arrangement using phase change material as thermal energy storage”, ICIMES-Springer Smart Innovation Systems and Technologies (SIST) series, August 2020.
Sethukrishnan.P, Alosh James, Srinivas M, S. Jayaraj, “Experimental investigation of water-jet impingement cooling in Photovoltaicthermal collector”, ICTCEES Conference July 18, 2020.
Sreepathi A, Sudheer A P, S Jayaraj, “Hydrodynamic modelling of AUV and computational study on Tail Geometry”, IEEE Students Conference on Engineering & Systems (SCES), No.978-1-7281-9339-7/20.
A. Kartheeswaran and T.J.S. Jothi, “Analytical and numerical investigation on entrainment in jet flows”, 1st online International Conference on Recent Advances in Computational and Experimental Mechanics 2020 (ICRACEM - 2020), Indian Institute of Technology Kharagpur, India, Sep. 4-6, 2020.
Aravind S, Milan K. John, C. Muraleedharan, B. Rohinikumar, “Performance Assessment of Banana Drying using a Forced Convection Solar dryer”, International Conference on Sustainable Technology Applications for Green Engineering Solutions STAGE 2020, 2020
Sabareesh V, Milan K. John, C. Muraleedharan, B. Rohinikumar, “Design and analysis of a novel drying chamber in indirect forced convection solar drying”, International Conference on Sustainable Technology Applications for Green Engineering Solutions STAGE 2020, 2020
Suraj P., Arun P., Muraleedharan C, “Development of a Systematic Design Procedure for Circulating Fluidized Bed Gasifier”, Green Buildings and Sustainable Engineering. Springer Transactions in Civil and Environmental Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-1063-2_6
Hameed N.A., Arun P., Muraleedharan C, “Analysis of Dynamic Behavior of Fluidized Bed Gasifier Using CFD” Green Buildings and Sustainable Engineering. Springer Transactions in Civil and Environmental Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-1063-2_7
Rinjesh M.A., Muraleedharan C., Vikas V.K, “Study of Air Distribution in Operating Room” Green Buildings and Sustainable Engineering. Springer Transactions in Civil and Environmental Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-1063-2_17
Sreehari, S., Albin Joseph, and Shijo Thomas. "Development of a low cost nanofluid based direct absorption solar collector." Materials Today: Proceedings 22 (2020): 2424-2430.
Harikrishnan H.R, Hrishikesh M, Deepak V, Endana Saikrishna, Gulshan Kumar Jha, A. Shaija, “Synthesis of biodiesel from waste cooking oil (WCO) and its characterization”, National Conference on Energy, Economy and Environment, ENERGY 2016, NIT Calicut, December 16-17, 2016.
S. Rajesh Kana, A. Shaija, H. R Harikrishnan, and M. Hrishikesh, “NOx Reduction Methods in Diesel Engine Using Waste Vegetable Oil Biodiesel”, 25th National Conference on Internal Combustion Engines and Combustion (25NCICEC 2017), NIT Surathkal,15-17, December 2017
Santhosh, Thomas, and Biju T. Kuzhiveli. "Heat transfer aspects and analysis of regenerative cooling in semi-cryogenic thrust chamber with fixed and variable aspect ratio coolant channels." IOP Conference Series: Materials Science and Engineering. Vol. 502. No. 1. IOP Publishing, 2019." Materials Today: Proceedings 22 (2020): 2424-2430.
Chaitanya V. Bhore, Atul B. Andhare, Pramod M. Padole et al., "Harmonic Response Analysis of PV Module Using Finite Element Method", 4th International and 19th National Conference on Machines and Mechanisms, IIT- Mandi, 5-7 December 2019
Joy, Albin et al. “Experimental Investigation on Fluidized Bed Gasifier Using Saw Dust as Biomass”, Green Buildings and Sustainable Engineering pp 105-111, Proceedings of GBSE 2018
Melbin Benny, Joel George, P. Arun and C. Muraleedharan, “An ANN approach to predict hydrogen composition in producer gas generated by fluidized bed gasifier”, International Conference on Energy and Environment: Global Challenges (ICEE-2018), 9-10 March 2018
Prajwal D. Chawane, Joel George, P. Arun and C. Muraleedharan, “Investigation of hydrogen generation in biomass gasification using stoichiometric thermodynamic equilibrium model,” International Conference on Energy and Environment: Global Challenges (ICEE-2018), 9-10 March 2018, National Institute of Technology Calicut.
Melbin Benny, Joel George, C Muraleedharan, Arun P, “Experimental Investigation on fluidized bed gasifier using saw dust as biomass”, International Conference on Green Buildings & Sustainable Engineering conducted by Rajagiri School of Engineering and Technology, Ernakulam on January 24-25, 2018
Varun Hegde, Ramis M.K, Sajith V, “Experimental and CFD study of pressure drop and heat transfer of a rectangle mini channel in laminar regime”, Proceedings of International Conference on Recent Innovations in Science & Technology (RIST-2017) Marthandam, India.
Ijas Hussain, T.J.S. Jothi, “Experiments on Vortex Rings: Interaction with Circular Surface”, International Conference on Advances in Mechanical Engineering Sciences (ICAMES-17), P.E.S. College of Engineering, Mandya, 21-22 April, 2017
Borker Mohnish, T.V Suchithra, Srinivas M, Jayaraj S, “Sustainable bioelectricity production using Setaria Faberi in Hydroponics system”, International conference on renewable and sustainable energy (ICRSE 2017) Hindusthan College of Engineering and Technology, Coimbatore. 12-13 April 2017
Johnson P. Joe, A. Shaija, “Effects of mass flow rate and temperature on the length of a triple concentric tube heat exchanger”, National Conference on Energy, Economy and Environment, Dec 2016, NITC.
Johnson P. Joe, A. Shaija, “Determination of length of triple concentric tube heat exchanger, fabrication and experimental investigation on double tube heat exchanger”, International conference on Advances of Mechanical Engineering Sciences (ICAMES), April 2017, PES College of Engineering, Mandaya, Karnataka
Varun Hegde, “Microwave assisted fish oil biodiesel production”, National conference on Energy, Economy & Environment, Energy2016, NIT Calicut.
Borker Mohnish, T.V Suchithra, Srinivas M, Jayaraj S, “Bioelectricity production using Plant Microbial Fuel cell with grass species Elusine indica”, International Conference on Advances on Energy Research (ICAER 2017), Indian Institute of Technology, Bombay. 12-14 December 2017.
Borker Mohnish, T.V Suchithra, Srinivas M, Jayaraj S, “A review on plant microbial fuel cells: electricity generation from living plants”, National Conference on Energy Environment and Economics (ENERGY 2016), National Institute of Technology, Calicut. 9-10 December 2016
Nived, A. Shaija, Shreenesh T.V, “Design, modelling and experimental analysis on a novel concentrating PV integrated water purification hybrid PVT system”, International Conference on Advances of Mechanical Engineering Sciences (ICAMES), April 2017.
Johnson P. Joe, A. Shaija, “Determination of length of a triple concentric tube heat exchanger, fabrication and experimental investigation on double tube heat exchanger”, International conference on advances of mechanical engineering sciences (ICAMES-17), April 21st and 22nd, 2017
Sundar R. Nath, M. Mubarak, Arka Bhowmik, A. Shaija, “Predictive model for microalgae growth in continious culture tubular photobioreactor: effect of light and temperature”, ICHMT International Symposium on Advances in Computational Heat Transfer, May 28 -June 1, 2017, Napoli, Italy.
Johnson P Joe, A. Shaija, “Effect of mass flow rate on the length of a triple concentric tube heat exchanger”, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016.
Sundar R Nath, M. Mubarak, Arka Bhowmik, A. Shaija, “Effect of photo-limitation on growth of microalgae in tubular photobioreactor”, National Conference on Energy, Economy and Environment, ENERGY 2016, NIT Calicut, December 16-17, 2016.
Nived, A. Shaija, Sreenesh T.V, “Design of a concentrated PV integrated water purification system”, National Conference on Energy, Economy and Environment, December 16-17, 2016.
Sarvjeet Singh Tomar, Joel George, Arun P, C. Muraleedharan, “Analysis of tar obtained from a bubbling fluidized bed gasifier using FTIR”, National Conference on Energy, Economy and Environment (ENERGY2016), 16-17 December 2016, NIT Calicut
T Praneeth Reddy, B Rohini Kumar, Dr. C Muraleedharan, “Study of water heating system with ptc using natural circulation”, National Conference on Energy, Economy and Environment, December 2016, NIT Calicut
Mugi Vishnu Vardhan Reddy, Jilse Sebastian, C Muraleedharan, A Santhiagu, “Mathematical modelling of acid esterification of rubber seed oil by response surface methodology and artificial neural network”, National Conference on Energy, Economy and Environment, December 2016, NIT Calicut
Varun Hegde, “Microwave assisted fish oil biodiesel production”, National conference on Energy, Economy & Environment, Energy2016, NIT Calicut.
Shreenesh Narayanan , A.Shaija, “Fabrication and analysis of a solar parabolic trough collector for pasteurization of milk in a dairy industry”, International Conference on New Frontiers in Chemical, Energy and Environmental Engineering(INCEEE- 2015),page no.211-12, NIT Warangal, 20-21 March,2015.
P. Prasanth, M. Mubarak, A. Shaija, “Effect of air sparging and Nitrogen on the growth and lipid accumulation of Chlorella pyrenoidosa”, 2nd International Conference on Thermal, Energy and Environment (INCOTEE), Kalasalingam University, Tamil Nadu, March 25&26, 2016
K. Varun Sankar, S, Rajesh Kana, A. Shaija, “Experimental optimization of Avocado oil methyl ester production and diesel engine performance study”, 2nd International Conference on Thermal, Energy and Environment (INCOTEE), Kalasalingam University, Tamil Nadu, March 25&26, 2016.
Anup Johson, A. Shaija, “Theoretical prediction of pressure drop and under rib velocity of single serpentine and repetive five pass spiral flow fields for polymer electrolytic membrane fuel cells”, 3rd International Conference on Developments in Science, Management and Engineering, International Organization of Scientific Research and Development, Trichy, 15 &16 April 2016
Shreenesh, T.V., Shaija, A., “Development of a solar milk pasteurization system for a dairy industry”, ICTAK International Conclave on Skills, Engineering & Technology (ICSET), Technopark, Trivandrum, 24-25 June, 2016.
Tomson Sebastian, A. Shaija, “Concentrated optical fibre based daylighting thermal system”, ICTAK International Conclave on Skills, Engineering & Technology (ICSET), Technopark, Trivandrum, 24-25 June, 2016.
Tomson Sebastian, A. Shaija, “Design and fabrication of novel Fresnel lens solar collector for daylighting and water heating”, National Conference on Solar Thermal Energy Technologies, IIT Jodhpur, Rajasthan, 26-28 February, 2016.
Rajesh Kana S, A. Shaija, Varun Sankar K, “Diesel engine characteristic studies with metal oxide doped nanoparticles in avocado biodiesel”, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016
Vipin VC, Jilse Sebastian, C Muraleedharan, “Enzymatic transesterification of rubber seed oil using Candida Antarctica lipase B”, National Conference on Energy, Economy and Environment, December 2016, NIT Calicut.
Basil Issac Mathew, S. Rupesh, C. Muraleedharan, Arun P, “Kinetic modelling of biomass gasification with carbon dioxide sorption”, International Conference on Developments in Science, Management And Engineering, (ICDSME2016) International Organization of Scientific Research and Development (IOSRD), Chennai, 15 & 16 April (2016).
Akhil Varghese, C. Muraleedharan, Arun P, “DFT analysis of metal complexes for selective nitrogen removal from the syngas based on binding energy criteria”, International Conference on Developments in Science, Management and Engineering (ICDSME2016), International Organization of Scientific Research and Development (IOSRD), Chennai, April 15 & 16, 2016
Ashkar Shamsu V, S. Rupesh, C. Muraleedharan, Arun P, “Non-stoichiometric Modelling of Air-steam Gasification of Rice husk in the Presence of CaO Sorbent”,
Second International Conference on Thermal, Energy and Environment (INCOTEE), Kalasalingham University, Tamil Nadu, March 25 & 26, 2016.
CM Shone and TJS Jothi, “Preparation of Gasification Feedstock from Leafy Biomass”, International Conference on Environment and Energy (ICEE14), December 15-17, 2014, Jawaharlal Nehru Technological University, Hyderabad 500 085, India. Page: 68
Priyank Gupta, M.Mubarak, A.Shaija,“ Production of bioethanol from Salvinia molesta using combined pre-treatment and hydrolysis with acids and distilled water”, Proceedings of International Conference on New Frontiers in Chemical, Energy and Environmental Engineering(INCEEE- 2015), page no.101-02, NIT Warangal, 20-21
Gupta P, Protim Das P, Mubarak. M, Shaija A, “Performance and emission analysis of single cylinder SI engine using bioethanol-gasoline blend produced from Salvinia Molesta”, IOP Conf. Series: Materials Science and Engineering 297 (2017) 012005 doi:10.1088/1757-899X/297/1/012005-
M. Mubarak, Priyank Gupta, A. Shaija, T.V Suchithra, “Production of bioethanol from Salvinia molesta and its utilization in single cylinder SI engine”, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016.
Eldhose K. Joy, Jilse Sebastian, C. Muraleedharan, A. Santhiagu, “Kinetic and experimental optimization for esterification of high free fatty acid rubber seed oil”, International Conference on New Frontiers in Chemical, Energy and Environmental Engineering, (INCEEE-2015), NIT Warangal, March 20-21, 2015.
Anil M, Rupesh S, Muraleedharan C, Arun P, “Analysis On The Effect Of Turbulence In The Modelling Of Fluidized Bed Reactors Using CFD”, International Conference on Engineering, Technology and Science, (ICETS’15), March 5th and 6th 2015, Muthayammal College of Engineering, Rasipuram.
Eldhose Joy, Jilse Sebastian, Chandrasekharan Muraleedharan, “Studies on acid value reduction of rubber seed oil and biodiesel production”, International conference on Environment and energy, Jawaharlal Nehru Technological University Hyderabad, 15-17 December 2014.
G Gopi and T.J.S Jothi, “Monte Carlo Simulation of Patterned Luminescent Solar Concentrator”, National Conference on Renewable Energy Innovations for Rural Development (NCREIRD 2014), Rural Energy Centre, Gandhigram Rural Institute, 19 March 2014.
Arun K.G, T.J.S. Jothi, S. Kumaravel, “Theoretical and Experimental Study of Magneto Hydrodynamic Propelled (MHD) Ship”, National Conference on Latest Trends In Mechanical Engineering (NCLTME-2014), NSS College of Engineering, Palakkad, March 25-27, 2014
Ashif S, A Shaija, “Feasibilty study of small wind turbine for domestic refrigeration”, National Conference on Energy, Economy and Environment, NIT Calicut, December 16-17, 2016.
V Aneesh and A Shaija, ’Performance Analysis of Single Slope Solar Still Integrated with Thermoelectric Refrigeration System, International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014) Ponjesly College Of Engineering, Nagercoil, Tamilnadu, India
Pradosh A C, Mubarak M and Shaija A, ‘Optimization Study on Extraction of Oil from Salvinia Molesta Using Response Surface Methodology, International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014) Ponjesly College Of Engineering, Tamilnadu, India.
Vipin VC, Jilse Sebastian, C Muraleedharan, “Enzymatic transesterification of rubber seed oil using Candida Antarctica lipase B”, National Conference on Energy, Economy and Environment, December 2016, NIT Calicut.
U. K. Sajith, S. Rupesh, C. Muraleedharan, P. Arun, “Characterisation of Biomass for Gasification”, National conference on latest trends in Mechanical Engineering, March 2014, Palakkad.